<button id="bbofb"><acronym id="bbofb"></acronym></button>

      <form id="bbofb"><wbr id="bbofb"><kbd id="bbofb"></kbd></wbr></form>

      1. <rp id="bbofb"></rp>
      2. <dd id="bbofb"><pre id="bbofb"></pre></dd>

        老化測試設備

        咨詢熱線

        18566398802
        首頁 > 標準大全 > Volvo VCS-1027, 14標準詳情
        相關測試儀器

        Volvo VCS-1027, 14測試標準

          本頁面標準信息均來源于網絡收集,或由參與標準制定的供應商提供,只作為參考使用。我們愿意和您交流Volvo VCS-1027, 14標準細節信息或Volvo VCS-1027, 14測試方法,歡迎致電【18566398802】

        Volvo VCS-1027, 14標準介紹

        Volvo VCS-1027, 14英文簡介

        This test procedure defines an accelerated corrosion test method, to be used in assessing the corrosion resistance of metallic materials, with or without corrosion protection, where there is a significant influence of chloride ions (e.g.; sodium chloride) from a marine source or road de-icing salt. This test is cyclic in nature, i.e.; test specimens are exposed to changing climates over time.

        Test specimens are placed in an enclosed chamber and exposed to a changing climate that comprises of a 1 week duration main test cycle, which is composed of 2 x 12 hour sub-cycles, one with controlled humidity cycling (sub-cycle 1) and the other including salt application (sub-cycle 2). Details as follows:

        Sub-cycle 1

        Step 1; 4.0 hours exposure to a constant climate of 95%RH at +35C. Step 2; exposure to a changing climate during which the humidity is reduced to 50%RH and the temperature increased to +45C, linearly, over a period of 2.0 hours. Step 3; 4.0 hours exposure to a constant climate of 50%RH at +45C. Step 4; exposure to a changing climate during which the humidity is increased to 95%RH and the temperature reduced to +35C, linearly, over a period of 2.0 hours.

        Sub-cycle 2

        On Mondays & Fridays sub-cycle 1 is replaced by the following;

        Step 1; Spray with salt solution (from above) for 15 minutes. Step 2; 1 hour & 45 minutes exposure to a constant climate of 95-99%RH at +35C (test specimens to remain wet throughout). Steps 1 & 2 are then repeated in sequence twice to give a total period of 6.0 hours. Step 3; drying in a changing climate during which the humidity is reduced to 50%RH and the temperature increased to +45C, linearly, over a period of 2.0 hours. Step 4; 2.0 hours exposure to a constant climate of 50%RH at +45C. Step 5; exposure to a changing climate during which the humidity is increased to 95%RH and the temperature reduced to +35C, linearly, over a period of 2.0 hours.

        Alternative sub-cycle 2

        As an alternative to sub-cycle 2, samples may be completely immersed in salt solution instead of sprayed with salt solution, in which case step 1 of the above sub-cycle 2 is replaced with the following step;

        Step 1; Immerse samples in salt solution for 15 minutes.

        STD1027, 14 is a Volvo test standard.

        Q-fog鹽霧試驗箱用于Volvo VCS-1027, 14 鹽霧腐蝕測試的流程

        Q-fog鹽霧試驗箱用于Volvo VCS-1027, 14 鹽霧腐蝕測試的流程

        Q-fog鹽霧試驗箱用于Volvo VCS-1027, 14 鹽霧腐蝕測試的流程

        溫馨提醒:本Volvo VCS-1027, 14可能存在更新的版本,建議尋找Volvo VCS-1027, 14的發行商確認。

        符合 Volvo VCS-1027, 14 標準的
        老化試驗箱

        • 鹽霧試驗箱圖片 鹽霧試驗箱

          Q-FOG CRH1100是一款的具有相對濕度控制功能和溶液噴淋功能的鹽霧試驗箱.

          Q-FOG CRH1100 馬上詢價
        • 鹽霧試驗箱圖片 鹽霧試驗箱

          Q-FOG CRH600比起SSP/CCT鹽霧試驗箱增加了一個可調濕度控制功能,這意味著CRH鹽霧試驗箱具備更廣泛的標準適用范圍。

          Q-FOG CRH600 馬上詢價
        近期文章
        亚洲av无码不卡免费在线观看

            <button id="bbofb"><acronym id="bbofb"></acronym></button>

            <form id="bbofb"><wbr id="bbofb"><kbd id="bbofb"></kbd></wbr></form>

            1. <rp id="bbofb"></rp>
            2. <dd id="bbofb"><pre id="bbofb"></pre></dd>