<button id="bbofb"><acronym id="bbofb"></acronym></button>

      <form id="bbofb"><wbr id="bbofb"><kbd id="bbofb"></kbd></wbr></form>

      1. <rp id="bbofb"></rp>
      2. <dd id="bbofb"><pre id="bbofb"></pre></dd>

        老化測試設備

        咨詢熱線

        18566398802
        首頁 > 標準大全 > FLTM BO 116-01_2007標準詳情
        相關測試儀器

        FLTM BO 116-01_2007測試標準

          本頁面標準信息均來源于網絡收集,或由參與標準制定的供應商提供,只作為參考使用。我們愿意和您交流FLTM BO 116-01_2007標準細節信息或FLTM BO 116-01_2007測試方法,歡迎致電【18566398802】

        FLTM BO 116-01_2007標準介紹

        FLTM-BO-116-01標準簡介

        FLTM-BO-116-01 汽車內飾材料暴曬試驗標準:水冷式氙弧燈氣候試驗箱方法

        FLTM  BO 116-01_2007標準英文版

        EXPOSURE OF INTERIOR TRIM MATERIALS IN A CONTROLLED IRRADIANCE

        WATER COOLED XENON-ARC APPARATUS

        Application

        This procedure is used to determine the effects of simulated weather on interior trim materials using a controlled irradiance water cooled xenon-arc Weather-Ometer® with an auxiliary lantern and filters.

        Apparatus Required

        Operating Filter

        335 nm long pass filters (SF-5 filters) or equivalent provided the transmission spectrum is within 95% of the SF-5 filter transmission at all wavelengths. The filters are reversible unless otherwise marked by a coating or etching.

        Dimensions for the Ci 5000 series Weather-Ometer®:

        339 mm +/- 0.13 mm x 70 mm +/- 0.13 mm x 3 mm +/- 0.52 mm

        Dimensions for the Ci 35A, Ci 65A & Ci 4000 Weather-Ometer®:

        220 mm +/- 0.13 mm x 70 mm +/- 0.13 mm x 3 mm +/- 0.52 mm

        Lamp Sensor Irradiance Filter

        420 nm Irradiance Filter

        Available from:

        Atlas Material Testing Technology LLC

        4114 Ravenswood Ave.

        Chicago, IL 60613 USA

        Calibration Lamp

        The calibration lamp must be calibrated to 420 nm with the lantern assembly removed.

        Available from:

        Atlas Material Testing Technology LLC

        4114 Ravenswood Ave.

        Chicago, IL 60613 USA

        Sample & Test Conditions

        Sample Conditioning

        All test values indicated herein are based on material conditioned in a controlled atmosphere of 21 +/-2 °C and 50 +/- 5% relative humidity for not less than 24 h prior to testing and tested under the same conditions unless otherwise specified.

        Test Conditions

        Testing conditions such as black panel temperature, dry bulb temperature, humidity, light cycle times and dark cycle times are equivalent to those outlined in SAE J2412 – Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus, Table 1,Section 6.1.5.

        Place the 335 nm long pass filters (SF-5 filters) or equivalent into the auxiliary lantern. Orient thelantern around the xenon-arc lamp assembly which is equipped with the Quartz/Type "S" Borosilicate filtered xenon-arc lamp source as outlined in SAE J2412 – Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus, Apparatus Set-Up, Section 6.

        Exposures are monitored based on measured light at 1.06 W/m2 -/nm@420 nm SAE J2412 –Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance XenonArc Apparatus, Table 1.

        Calibration

        Equipment Calibration

        As per SAE J2412 – Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus, Appendix A, Section A.3 and Appendix B.

        Maintenance

        Equipment Maintenance

        As per SAE J2412 – Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus, Appendix A.

        Note: SF-5 auxiliary filters should be cleaned at every lamp calibration period or more frequent if necessary.

        SF-5 filters and the 420 nm interference filter should be changed per the manufacturer's recommendations/or within 13,000 hours of use.

        Exposure

        Sample Exposure

        As per SAE J2412 – Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus, Test Procedure, Section 7.

        Evaluation & Reporting

        Sample Evaluation and Exposure Report

        As per SAE J2412 – Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus, Evaluating and Reporting, Section 8 and Exposure Report, Section 9.

        AATCC Gray Scale, 10 Step, According to AATCC Evaluation Procedure 1/ISO 105-A02 for Evaluation of Color Change.

        FLTM BO II--01_2007測試機構

        Upon request measure the gloss with a 60° glossmeter (or as specified in the applicable Engineering Standard) according to FLTM BI 110-01. Record the unexposed and exposed gloss.

        Chemicals, materials, parts and equipment referenced in this document must be used and handled properly. Each party is responsible for determining proper use and handling in its facilities.

        溫馨提醒:本FLTM BO 116-01_2007可能存在更新的版本,建議尋找FLTM BO 116-01_2007的發行商確認。

        符合 FLTM BO 116-01_2007 標準的
        老化試驗箱

        • 氙燈老化試驗箱圖片 氙燈老化試驗箱

          Q-SUN Xe-3-HSE氙燈老化試驗箱具有全光譜光照功能、濕度控制以及噴淋功能,其命名規則為濕度控制(H)、噴淋(S)。

          Q-SUN Xe-3-HSE 馬上詢價
        • 氙燈加速老化試驗箱圖片 氙燈加速老化試驗箱

          Q-sun Xe-1-BCE氙燈加速老化試驗箱配有全光譜氙弧燈、太陽眼輻照度控制系統,該型號的氙燈加速老化試驗箱同時具有背部噴功能。

          Q-sun Xe-1-BCE 馬上詢價
        • 氙燈耐候試驗機圖片 氙燈耐候試驗機

          Q-SUN Xe-1-SCE氙燈耐候試驗機是一款支持水噴淋功能和制冷功能的氙燈加速老化設備

          Q-SUN Xe-1-SCE 馬上詢價
        • 氙燈老化試驗機圖片 氙燈老化試驗機

          Q-SUN Xe-3-HCE是一款具有全光譜光照模擬、濕度控制以及制冷功能的氙燈老化試驗機,其命名規則為濕度控制(H)、制冷功能(C)。

          Q-SUN Xe-3-HCE 馬上詢價
        • 氙燈耐氣候試驗箱圖片 氙燈耐氣候試驗箱

          Q-SUN Xe-3-HDSE氙燈耐氣候試驗箱具有濕度控制、以及雙噴淋功能,其命名規則為濕度(H)、雙噴淋(D)、噴淋(S)。

          Q-SUN Xe-3-HDSE 馬上詢價
        • 氙燈耐候試驗箱圖片 氙燈耐候試驗箱

          Q-SUN Xe-3-HSCE氙燈耐候試驗箱同時具有濕度控制、噴淋以及制冷功能,其命名規則為濕度(H)、噴淋(S)、制冷(C)。

          Q-SUN Xe-3-HSCE 馬上詢價
        近期文章
        亚洲av无码不卡免费在线观看

            <button id="bbofb"><acronym id="bbofb"></acronym></button>

            <form id="bbofb"><wbr id="bbofb"><kbd id="bbofb"></kbd></wbr></form>

            1. <rp id="bbofb"></rp>
            2. <dd id="bbofb"><pre id="bbofb"></pre></dd>